14 in 1 kit educational solar robot instructions

With 14 potential transformations, the educational solar robot kit provides vivid instructions via helpful assembly diagrams. The propelling force behind the device comes from the solar panel, whose energy slurps up sunshine to bring the robot to life. Budding inventors can construct a beetle, before morphing it into a turtle, scorpion, speedster, and more.

Aspiring young inventors can learn about sustainable energy sources with the 14-in-1 kit educational solar robot! A solar panel harnesses the power of the sun to charge its battery, which can then activate the robot’s motors and propel it forward. With this renewable energy, children are able to transform the robot into fourteen extraordinary models, such as a beetle, a turtle, a scorpion, and a speedster!

The robot’s back boasts a mounted solar panel, while its abdomen is home to a battery. Strewn between the two, wires link the solar panel and battery and run through the robot’s body until they finally reach its leg-mounted motors.

The body of the robot is equipped with hinges which attach to its legs, giving it the ability to move in various directions. These joints permit the robot to travel forwards, backwards and twist.

Drawing on the sun’s energy, the solar panel is the robot’s gateway to sustainable energy. This essential component absorbs and preserves the sun’s power in a battery, which subsequently fuels the motors as needed. Without the solar panel and battery, the robot would be helpless.

With the 14-in-1 educational solar robot kit, children can partake in a unique and exciting learning experience about renewable energy. After soaking up the sun’s energy via its solar panel, it stores it within its battery and sends power to the robot’s motorized components. One can then transform the robot into any of its 14 shapes, such as a beetle, turtle, scorpion, or a speedster!

Post time: 2023-06-26

Related Product



      Placement position Ground Applicable component type Framed or frameless solar panels of various sizes Raw materials of support aluminium alloy Installation angle According t […]

  • Solar panel

    Solar panel

    PV Kits for fields, flat and pitched roofs The kit using photovoltaic support system is critical to photovoltaic support, including wind calculation speed, order picking speed and […]

  • PV bracket tracking system

    PV bracket tracking system

    Ground tracking photovoltaic support Fully adapt to 210 major components The product has been tested in CPP wind tunnel Use AI algorithm to optimize tracking mode Irregular land is […]

  • Inclined roof photovoltaic support

    Inclined roof photovoltaic support

    V support system for inclined roof The inclined roof installation system is suitable for all kinds of inclined roofs. According to the roof bearing capacity and waterproof requirem […]

  • PV inverter

    PV inverter

    PV inverter (PV inverter or solar inverter) can convert variable DC voltage generated by photovoltaic (PV) solar panel into AC inverter of mains frequency, which can be fed back to […]

  • Flat roof photovoltaic support

    Flat roof photovoltaic support

    Flat roof photovoltaic support       Analysis of installation and construction problems of flat roof photovoltaic power station   The external roof system on the roo […]

  • PV support KITS

    PV support KITS

    What is Cable conduit? A metal protective tube with certain mechanical strength laid on the outer layer of the cable to prevent the cable from being damaged   Cable threading […]

  • PV bridge support

    PV bridge support

    Features of PV bridge support  products: Strong resistance to negative wind pressure, good stability, strong bearing capacity and strong lateral tensile capacity; Easy and fast ins […]